Product leaflet

Price list

Specflue Ceramic

Specflue Ceramic is a CE approved twin wall insulated chimney system, suitable for appliances burning modern day fuels including wood pellets, biofuels and solid fuel. The material specification and construction of the product has been designed specifically to withstand very high temperatures and aggressive conditions within the flue caused by slumbering and burning of some fuels.

The inner liner is manufactured out of 4mm thick engineered Ceramic, with a high grade mineral wool insulation, encased by a stainless steel outer skin. It is available in three diameters, 130mm, 150mm and 200mm internal diameter including various adaptors, pipes, bends, tees and support components.

• 4mm ceramic inner/304 outer stainless steel insulated chimney system
• Internal and external usage
• All fuels - including biomass and biofuel
• Residential and commercial installations
• 30mm insulated cavity
• Diameters from 130mm to 200mm
• CE Approved BS EN 13063-1 Designation T450 N1 D3 G50

PRODUCT DESCRIPTION

The design and specification of Specflue Ceramic has been tested and meets the requirements of BS EN 13063 part 1. Product designation T450 N1 D3 G50 - 0769-CPD-7039. The product has undergone thermal shock test to 1000ºC (chimney fire conditions) for a period of 30 minutes.

Specflue Ceramic has a guarantee on the ceramic liner for 30 years from installation.

The product has been designed also with weight in mind. The following weights are for metre runs excluding support components. 130mm - 9.7kg/m 150mm - 11.8kg/m The joints within the system do not require any form of sealing. The components simply push fit together using locking bands provided. This ensures a firm and gas tight joint. The chimney system can be used both internally and externally. Condensation is kept to a minimum due to the Ceramic liner and quality mineral insulation used in manufacture. A 50mm air gap to combustible materials must be maintained.

Due to the design of the Specflue Ceramic, the inner liner and the outer casing are not joined, thus reducing heat transfer. Subsequently, a load bearing support component must be used in every installation. Failure to include one will cause the weight of the inner ceramic liner to be transferred to the flue pipe/appliance.